The Question is from neet-physics alternating-current instantaneous-peak-rms-and-average-value-of-ac, and it was created by the author P.NARASIMHA

Question

An AC circuit with a non-ohmic resistive element has a current described by $i(t) = 5\sin(\omega t + \pi/3)$. If the voltage across the element is $v(t) = 10\sin(\omega t)$, which statement BEST describes the relationship between instantaneous power, average power, and RMS power?

P.NARASIMHA · Accepted Answer

## CORE INFORMATION
✓ **Answer**: 2
## CONCEPT FRAMEWORK
 **Primary Concept**: AC power calculations, instantaneous power, average power, RMS power
 **Related Topics**:  Phase difference in AC circuits, non-ohmic elements
 **Prerequisites**: Understanding of sinusoidal functions, trigonometric identities, and power calculations in AC circuits.
## SOLUTION PATHWAY
**Given Information**:
  $i(t) = 5\sin(\omega t + \pi/3)$
  $v(t) = 10\sin(\omega t)$
**Method & Steps**:
 1. Calculate the instantaneous power.
  Reasoning: Instantaneous power is given by $p(t) = v(t)i(t)$. 
  Formula/Rule: $p(t) = v(t)i(t) = 10\sin(\omega t) 	imes 5\sin(\omega t + \pi/3) = 50\sin(\omega t)\sin(\omega t + \pi/3)$
 2. Determine if the instantaneous power is constant or fluctuates.
  Working: The expression for $p(t)$ contains a product of sine functions with different phases, indicating that the instantaneous power will fluctuate with time.
  Key Point: The product of two sinusoidal functions results in a waveform that is not purely sinusoidal, hence the fluctuation in power.
 3. Calculate the average power.
  Reasoning: Average power is given by $P_{avg} = \frac{1}{T}\int_{0}^{T} p(t)dt$, where T is the period.  Due to the phase difference between voltage and current, the average power will not be zero.  However, a more precise calculation is needed to confirm this.
  Working: Using trigonometric identities, we can rewrite $\sin(\omega t)\sin(\omega t + \pi/3)$ as a sum of cosine functions. The integral of the cosine terms over a full period is zero. Therefore, the average power will be non-zero due to the phase difference (π/3).
  Key Point: The average power is the DC component of the instantaneous power.
 4. Determine the RMS power.
  Reasoning:  RMS power is related to the RMS values of voltage and current.  $P_{RMS} = V_{RMS}I_{RMS}$ where $V_{RMS} = \frac{V_m}{\sqrt{2}}$ and $I_{RMS} = \frac{I_m}{\sqrt{2}}$.
  Working: $V_{RMS} = \frac{10}{\sqrt{2}}$ and $I_{RMS} = \frac{5}{\sqrt{2}}$. Therefore, $P_{RMS} = \frac{10}{\sqrt{2}}	imes\frac{5}{\sqrt{2}} = 25$. The average power will be less than the RMS power. 
  Result: The instantaneous power fluctuates, the average power is non-zero, and the RMS power is greater than the average power.
  Verification: The solution aligns with the general behavior of AC circuits with non-zero phase angles between voltage and current.
 ## OPTION ANALYSIS
A :x: Incorrect. Instantaneous power is not constant due to the phase difference.
B ✓: Correct. The instantaneous power fluctuates, average power is non-zero (due to the phase difference), and RMS power is greater than the average power.
C :x: Incorrect. Average power is non-zero due to the phase difference.
D :x: Incorrect. Instantaneous power fluctuates, and RMS power is greater than the average power.
 ## LEARNING AIDS
 **Common Mistakes**:
  1.Assuming constant instantaneous power in AC circuits with a phase difference.: Remember that instantaneous power depends on the product of instantaneous voltage and current, which fluctuate differently based on the phase difference.
  2.Ignoring the phase difference when calculating average power: The phase difference significantly affects the average power; it will only be zero if the phase difference is 90 degrees.
 **Quick Tips**:
  1.Remember the relationship between RMS, average, and peak values for sinusoidal waveforms.
  2.Use trigonometric identities to simplify calculations involving products of sinusoidal functions.

P.NARASIMHA · Answer

The instantaneous power is constant, the average power is zero, and the RMS power is equal to the peak power.

P.NARASIMHA · Answer

The correct Option is "The instantaneous power fluctuates, the average power is non-zero, and the RMS power is greater than the average power."

P.NARASIMHA · Answer

The instantaneous power fluctuates, the average power is zero, and the RMS power is equal to the average power.

P.NARASIMHA · Answer

The instantaneous power is constant, the average power is non-zero, and the RMS power is less than the average power.

NEET Physics Alternating Current Instantaneous, Peak, Rms and Average Value Of A.C MCQs

Select Topic

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

Question Tags

NEET Subjects

Our Bots

Company